Top

Zoom

Description

Honeywell FL/MCP/MMF301 - Call Point Module

General

FL/MCP/MMF301 without an integral isolator is a call point designed to provide a manual alarm interface to a Firelite's fire alarm control panel. Installation efficiency and flexibility is offered at the heart of the call point range.

Both break glass and resettable operating  elements can be used in the standard unit. Operation of the re-settable element is indicated by a yellow strip on the element which becomes visible when activated. With the addition of a hinged transparent cover the element may be protected against accidental operation and may be further protected by using a cover seal which requires breaking in order to operate the unit.

The call point uses one of 159 possible addresses which is simply 'dialled in' using the two rotary decade switches on the rear of the unit.  A specialist test key may be inserted into the bottom of the unit to lower the resettable flex portion and release the micro-switch and thus a full functional test is achieved.

Description

Intelligent call point without isolator, LiteSpeed™ Protocol, with in-built back box , Surface mount, with Flexi element Intelligent call point without isolator, LiteSpeed™ Protocol, without back box , Semi-Flush mount mount, with Flexi element Intelligent call point without isolator, LiteSpeed™ Protocol, with in-built back box , Surface mount, with Glass element Intelligent call point without isolator, LiteSpeed™ Protocol, without back box , Semi-Flush mount mount, with Glass element

Features

  • Unique 'Plug & Play' installation concept
  • Re-settable operating element option
  • Analogue addressable communications
  • Semi-Flush or surface Mounting
  • Backward compatibility
  • Enhanced aesthetics
  • Extended warranty

Installation

These call points are suitable for semiflush mounting as standard, for indoor use. This uses a single-gang electrical knock-out box in conjunction with a terminal tray for isolated screen continuity connection. However if surface mounting is required, then a matching single terminal back box is also available. Mounting hardware and installation instructions are provided with each module.

Decision Supporter

Verified Supplier
Member Since
June 2017

Specs

 Criteria

 Details

 Dimensions
 Semi-flush mounting 89(w) x 93(h) x 27.5(d)
 Surface mounting 89(w) x 93(h) x 59.5(d)
 Weight Flush 125g
 Surface 175g
 Mounting hole centres 60mm
 Current Consumption
 Quiescent (without isolator) 375μA
 Alarm Current 600μA
 Operating Voltage 15 V to 30VDC maximum
 Environmental Limits
 0 Degree Celsius to +49 Degree Celsius operating temperature | 10% to 93%, non-condensing relative humidity
 Ingress Protection (IP) Rating IP24D

Resources

Reviews

You're reviewing: Honeywell FL/MCP/MMF301 - Call Point Module

How do you rate this product? *

   
Product Rating